In general, the small size of the restriin area is generally small and it usually has poor ventilation and poor ventilation caused moisture easily lead to the bathroom, it will especially affected on the bathroom furniture causing problem such as distortion, mold, etc.

eModernDecor.com

Bathroom waterproofing can largely alleviate the damp problem, especially in poorly ventilated bathroom, in the decoration should be good water. Try to choose brand waterproof materials in strict accordance with the construction process brushing, moisture is the key to the bathroom, try not to move or reduce the movement of the pipeline. If you want to make changes, water-resistant construction details must be strict, not only need to smooth vertical and horizontal pipes, laying a solid, pipe where the roots before the brushing waterproof material, must be cleaned and then brushing 2-3 times, particularly in the floor drain, should be set the lowest floor in the bathroom, easy let the water discharge

eModernDecor.com

Once Waterproofing has been completed, it must test by avoiding the water for 24 hours, check for leaks after 24 hours, if no leak, then it mean it has a very successful waterproof layer. In addition, valves, taps and other fittings must wear waterproof “jacket” that possession brushing rust paint, underground pipe anti-corrosion paint brush, water supply pipes and fittings, equipment connections should be tight, leak-free by-pass the water test. Ceramic sanitary ware, stainless steel and other metal appliances (shower heads, faucets, etc.) should be regular care. Decontamination is best to use toothpaste and toothbrush, friction is small but clean and very effective, not the protective film on the ware destroyed, effectively prevent mildew generated.

Selection: to select a waterproof sheet

Bathroom moisture resistant material used is also very critical. The best choice for bathroom floor will be tiles, it moisture better and more easy to clean. Generally use wall tiles, wallpaper, etc. If you need to use special waterproof materials, we must consider the bathroom ventilation.

Bathroom furniture, plates can not be careless, furniture, cabinet board should choose waterproof, moisture-proof sheet, select the furniture back to the attention of the treatment, the use of dual decorative veneer MDF back panel to avoid the exposed substrate, water vapor back into the plate from the cabinet is not easy, with good moisture effects, also need to pay attention to the edge of furniture are tight, too thin edge easily lead to moisture penetration. Placed in bathroom furniture, pay attention to distinguish between wet and dry, try to put the furniture away from the bathroom cabinet, well ventilated place, if the poor bathroom ventilation that allows designers to design a retaining “wall”, planning a wet and dry areas.

eModernDecor.com

Maintenance: do the daily moisture treatment

Bathroom moisture also need to make daily moisture treatment, otherwise easily lead to indoor moisture accumulation on the furniture, hardware, resulting in immersion, resulting in corrosion and mildew. In the wash, shower, bathroom, will leave a large number of drops of water, water vapor, if the bathroom has windows, be sure to open the window ventilation, and the remnants of the ground with a mop to clean up water droplets. Bathroom fittings, taps on the water vapor, water droplets also need regular cleaning, especially the shower, the water droplets on the hardware very much, should be promptly cleaned with a dry cloth.

The back of bathroom furniture, clean up, it tends to be overlooked more easily gather the condensate, so the bathroom furniture is best placed to stay out of the gap to facilitate proper cleaning, or select the front, back, bottom of the floating bathroom cabinets, clean condensing water is very convenient